| Wired LAN
Interface |
|
| Compliant with |
IEEE 802.3 or
Ethernet II MAC |
| Physical
Interface |
Attaches
directly to a hub or network |
| Network
Operating System Supported |
All |
| Network
Protocols Supported |
All |
| Network
Connection |
Ethernet MAU
(Standard AUI port without Power supplied) |
| Wireless
LAN Interface |
|
| RF MAC
Protocol |
Radio
encapsulation of IEEE 802.3 or Ethernet II MAC Frame |
| Network
Topology |
Point to point
with data link retransmission |
| Radio
Specification |
|
Type |
Direct
Sequence Spread Spectrum |
Frequency Range |
2400-2483.5
MHz (ISM band) |
Carrier Frequency |
2436.07 MHz |
Modulation |
BPSK, 32 Mcps |
Processing Gain |
12dB (Nominal) |
Communication Method |
Half Duplex |
Channel Access Method |
Spread
Spectrum p-persistent CSMA (SS-P CSMA) |
Transmit Power |
14 dBm
(typical) |
Sensitivity |
-85 dBm
(typical) |
| Configuration
and Management |
|
| Upgradability |
Firmware is
upgradable via AUI port. |
| Configuration
and Monitoring |
In band via
AUI to local radio or remotely transmitted from another radio.
Proprietary commands and responses embedded in ethernet packets. |
| SNMP |
Not Supported |
| Security |
Security-coding
scheme with over 65,000 values available. |
| LED Indicators |
Power Wired
Network Activity
Wireless(Rx) Network Activity
Wireless(Tx) Network Activity |
| Electrical |
|
| Power Supply |
Requirements:
6.2 VDC, 2 A. AC adapter optional – Input 100 ~ 125VAC, 0.4A |
| Mechanical |
|
| Cover |
Wall mountable
metal chassis |
| Dimensions (W
x D x H) |
9" x
9" x 5" |
| Weight |
3.2 Lbs |
| Antenna |
Reverse TNC
bulkhead RF connector |
| Environmental |
|
| Operating
Temperature Range |
0ºC ~ +40ºC
(32ºF - 105º) |
| Storage
Temperature Range |
-20ºC ~
+60ºC (-4ºF – 140ºF) |
| Humidity |
0 ~ 90%
non-condensing |
