One to Eight Channels
Up to eight independent, non-compressed, full-duplex T1 channels are provided (depending on model). This capability provides an alternative to leased lines or traditional licensed radio for fast and easy connection of T1 capacity requirements.

Spread spectrum technology allows a license-free approach to accomplish medium-capacity spur connections quickly, without FCC licensing or coordination.

Full-Featured
Built-in orderwire provides an easy means for private telephone connections between radio sites.

Open network management yields flexibility for operators with central equipment monitoring facilities.

The one-piece indoor design, loopback functions, flexible power connections and external adjustments result in a system that is easy to install and maintain. Also, wide temperature operation allows users to install LYNX.sc in outdoor cabinets or shelters without additional air conditioning or heating. 

Applications
LYNX.sc digital microwave radios are easily connected to voice, data or video sources. Outstanding system gain provides wireless point-to-point link distances greater than 50 miles, line-of-sight. Hub and repeater configurations are also easily implemented. 

Typical applications include cellular/PCS base station interconnect, rural telephone and remote data connections. 

The LYNX.sc Product Line

The LYNX.sc family offers six models for full-duplex T1 (1.544 Mbps) wireless communications: 2.4 GHz T1, 5.8 GHz T1, 2.4 GHz 2 x T1, 5.8 GHz 2 x T1, 5.8 GHz 4 x T1 and 5.8 GHz 8 x T1. The LYNX.sc family also offers a similar line of E1 (2.048 Mbps) and fractional capacity (56 to 512 kbps) radios. Each model offers selectable frequency channel plans with excellent adjacent channel performance, resulting in easy installation of repeaters and hubs. In addition, the LYNX.sc provides a combination of several exclusive features, yielding increased flexibility and reliability as well as lower cost installation and maintenance.

Wide Operational Temperature Range 

Small Size, One-Piece Construction 

Far-End Monitoring 

Protect Port

Multiple Channel Plans 

High System Gain & Forward Error Correction (FEC) 

Spread Spectrum Technology 

Loopback Functions 

Wide Input Power Range 

RF Power Control 

Two Service Channels 

Network Management (OpenLYNX™) 

Easy to Install: Small dish or flat panel antennas can be used at both 2.4 and 5.8 GHz, along with low-loss coaxial cable to provide excellent performance for line-of-sight distances from less than 1 mile to more than 50 miles. The installation shown provides a rural telephone T1 extension using a 5.8 GHz 2 foot parabolic dish and 1 /2 inch coaxial cable, mounted on a telephone pole.  

Hub Site Engineering: Using standard microwave radio path engineering practices, LYNX.sc radios can be integrated into hub sites, even in the presence of other spread spectrum and licensed microwave systems. This site illustrates seven LYNX.sc radios, all operating in the 5.8 GHz band, located at a hub site that also employs a variety of licensed microwave radios.  

Cabinet Mounting: The LYNX.sc can be mounted in existing equipment cabinets, stand-alone cabinets or any weatherproof enclosure. Occupying only two rack mount units (with no outdoor mounted electronics) plus a -30 to +65 degree Celsius operating temperature range, the reliable LYNX.sc is very easy to install and maintain. The LYNX.sc is shown mounted in a telephone switch cabinet without air conditioning or heating.  

Network Management: Utilizing an open architecture protocol, the LYNX.sc can be integrated into existing network management systems. OpenLYNX™ gives users a fast and intuitive system for control, diagnostics and troubleshooting of the radio network.  

Specifications and Ordering Information 

Specifications All Models

System
Antenna Connector N-type female
Full Output Power, 2.4 GHz _+27 dBm, +30 dBm maximum
RF Attenuation Range, 2.4 GHz 16 dB, minimum
Full Output Power, 5.8 GHz _+20 dBm, +23 dBm typical
RF Attenuation Range, 5.8 GHz 20 dB, minimum
Maximum Receive Level 0 dBm, error free; +10 dBm, no damage
Coding Direct sequence
Number of Codes 4 (selectable)
Processing Gain 10 dB, minimum
Transmission Delay
(radio only) 250 µs, maximum
(10 mile path) 300 µs, maximum
(30 mile path) 400 µs, maximum
Regulatory Compliance FCC Part 15.247, Class B & IC RSS210/139  

Digital Line Interface
Digital Interface DSX-1*
Connectors DB9, RJ-45 (RJ-48c)
Bantam Jacks** Tx & Rx monitor
Line Code B8ZS or AMI, selectable
Line Build Out 0 to 660 feet, selectable Blue Code AIS (Alarm Indication Signal)
Far-end Loopback Local or remote control (internal/external signal source)  

Auxiliary Connections 
   Orderwire Handset 2-wire, RJ-11
VF Orderwire Bridge 600 ohm balanced, 4-wire, 0 dBm, DB25
Diagnostics Port RS-232/RS-422 (craft/TBOS), DB9 
Aux Data Port RS-232/RS-422, (Clear Service Channel) Alarm Port 2 Form C, 6 TTL, DB25
Protect Port RS-232, RJ-45 
Test Points output power, near & far-end RSL  

Power/Environment 
DC Power ±20 to ±63 Volts, <45 Watts
Optional AC Adapter 100 - 250 Volts, 50 - 60 Hz
Power Connector 6-pin barrier strip, plug-in
Operational Temperature -30 to +65°C
Humidity 0 to 95% non-condensing
Altitude 15,000 feet, maximum  

Physical
Size (WxHxD)*** 17.2 x 3.5 x 14.5 inches (2RU)
Weight 11 pounds  

*Meets CCITT G.823, AT&T Pub 62411, Bellcore TR-TSY-000499.
** Not provided on Model 31800 & 31145.
***19-inch EIA rack mount, 2-unit height (mounting brackets supplied).  

Ordering Information

System
31250-xxx 2.4 GHz T1
31650-xxx 2.4 GHz 2 x T1
31000-xxx 5.8 GHz T1
31600-xxx 5.8 GHz 2 x T1
31800-xxx 5.8 GHz 4 x T1
31145-10xxx 5.8 GHz 8 x T1
201-9350 OpenLYNX™ GUI  

Channel 
xxxxx-A1x A1 channel
xxxxx-A2x A2 channel
xxxxx-B1x B1 channel †
xxxxx-B2x B2 channel †
xxxxx-C1x C1 channel ††
xxxxx-C2x C2 channel ††  

AC adapter
xxxxx-xx0 without AC Adapter
xxxxx-xx1 with AC Adapter  

†Models 31250, 31000, 31600 and 31145 only. ††Model 31000 only.  

Specifications subject to change without notice.