 |
Tsunami GX 90 Technical Specifications | Frequency | Digital Capacity | Channel Pairs | FCC Emmission Designator | Threshold (BER=1x
10-6) | Output Power | System Gain | Distance (Miles/
KM) | | 5725-5850 MHz | - 98 Mbps4 | 1 | 28M1G7D | ≤-80 dBm | ≥+23.5 dBm1 | ≥103.5 dB, 106 dB typ. | 0 to >33.7/54.43 |
| System | | Configuration | Split-box: IDU, RF Unit | | Modulation | DSSS; QPSK | | Frequency Stability | ±10 ppm | | RF Attenuation Range1 | ≥20 dB | | Maximum Receive Signal | -20 dBm error free; 0 dBm no damage | | Error Floor | <10-11 | | Latency (T1)2, one-way | 325 µsec ±10% | | Error Correction | Reed-Solomon | | Security | 12 character Link ID (48 bits) | | Regulatory Compliance | FCC Part 15.247; IC RS210 | | FCC ID | HZB-S58-GX1 | | Industry Canada ID | 1856A-U5358GX1 | | Digital Line Interfaces | | Main Data Channel4 | 96 Mbps aggregate
48 Mbps full duplex | | 10/100 Base T | RJ-45 modular jack
Auto-sense MDI/MDI-X | | 10/100 Base FX | SC-Type, multi-mode Fiber | | Compliance | IEEE 802.3 | | Wayside Data Channels | | T1 | DSX-1 (2 each)
RJ-48C modular jack | | Auxiliary Interfaces | | Orderwire (DTMF) | RJ-11, 100 addresses | | VF | 8 pin modular jack, 4-wire
0dBm @ 600 ohm, balanced | | Aux Data (serial) | 8 pin modular jack, EIA-561
≤19.2kbps, selectable, DCE | | Fault and Configuration Management | | Network Management | SNMP v2c (MIB II, enterprise MIBs), embedded HTML server, Telnet, VT-100 terminal | | Far End Management | Via NMS (embedded router, gateway address, subnet mask), front panel display | | Interfaces | | NMS 1 | 10/100BaseT, RJ-45, auto-sense | | NMS 2 | 10/100BaseT, RJ-45, auto-sense | | Configuration (serial) | EIA-574, 9600bps, 9-pin
Sub-D, DTE | | External Alarm Interface | | Connector | 9-pin Sub-D female | | Outputs | 2 Form C Relays (Major, Minor) | | Inputs | 2 TTL with internal pull-ups | | Power/Environment | | Input Voltage Range | -20 to -60 Vdc or
+20 to +60 Vdc | | Power Consumption | <70 Watts | | Power Connector | 3-pin terminal block | | Operating Temperature | | IDU | 0°C to +50°C | | RF Unit | -30°C to +55°C | | Humidity | | IDU | 95%, non-condensing | | RF Unit | 100%, condensing | | Altitude | up to 15,000 ft/5000 m | | Wind Loading (RF Unit) | up to 110 mph/96 kts | MTBF IDU
MTBF RF Unit | >100,000 hours
>100,000 hours |
| Physical Dimensions |
| IDU | RF Unit | | Size (in/cm) | 17.2 X 10.9 X 1.72 / 43.6 X 27.6 X 4.4 | 14.1 X 10.9 X 1.72 / 35.8 X 27.6 X 4.4 | | Weight (lbs/kg) | 6.5/2.9 | 12.0/5.4 | | Mechanical | | RF Unit | Antenna Port
(outdoor RF cable not provided) | Type-N female |
| IDU Port | TNC female |
| Cable to IDU | LMR-240 or equiv. <100m
LMR-400 or equiv. <200m
LMR-600 or equiv. <300m | | Mounting | IDU | EIA rackmount, 19” or 23”, 1RU |
| RF Unit | EIA rackmount, 19”or 23”, 1RU, or outdoor pole mount bracket (optional) | | Selectable Frequency Channel Pair | | Channel Plan A | 5745/5830 MHz | | Ordering Information |
| 67255 | Low Band Terminal, 301-57710-61L0 |
| 67254 | High Band Terminal, 301-57710-61H0 |
| ACC-GX-RF-2 | Optional RF Unit Outdoor Mounting Kit |
| 201-31075-1 | Optional AC Adapter 110/220 VAC with cable and connector | | Shipping Configuration | | Tsunami.GX 90 IDU (Indoor Unit) | | ISM Low Band or High Band Unit | | IDU Indoor Rack | ACC-GX-RF-1 RF Unit Indoor Mounting Kit
(includes 12” IDU to RFU TNC-to-TNC cable) | | Quick Install Guide | | CD-User Documentation |
1 Output power is specified at zero attenuation
2 Does not include air latency of approximately 5.4 µsec/mile
3 RF Unit installed outdoors with 6ft. parabolic antenna, 99.995% one-way availability, average climate/terrain, no multipath reflection.
4 No Waysides enabled
|
|
