PRODUCT SEARCH

PRODUCTS

NEWS

Fri, 08 Nov 24 11:28 am EST    Languages: Español  Français  Português
Extranet Login | Site Map | Contact Us

Our Coordinates: Lat 42.75 N, Long 71.85 W  


Lynx.GX 4T, 8T, 16T Technical Specifications

ProductFrequency BandDigital Capacity (Full Duplex)Channel PairsThreshold (BER=1x
10-6)
Output Power (min) 1System GainDistance (Miles/
KM)
Lynx.GX 4xT15725-5850 MHz4xT1 (4x1.544 Mbps)3 (A, B, C)≤-88 dBm≥+23.5 dBm≥111.5 dB, 114 dB typ.>36/58.1
Lynx.GX 8xT18xT1 (8x1.544 Mbps)2 (A, B)≤-86 dBm≥109.5 dB, 112 dB typ.>32.8/52.9
Lynx.GX 16xT116xT1 (16x1.544 Mbps)1 (A)≤-83 dBm≥106.5 dB, 109 dB typ.>27.6/44.5

System
ConfigurationSplit-box: IDU, RF Unit
ModulationDSSS; QPSK
Frequency Stability±10 ppm
RF Attenuation Range≥20 dB
Maximum Receive Signal-20 dBm error free; 0 dBm no damage
Error Floor<10-11
Latency (T1)2, one-way325 µsec ±10%
Error CorrectionReed-Solomon
Security12 character Link ID (48 bits)
Regulatory ComplianceFCC Part 15.247; IC RS210
FCC IDHZB-S58-GX1
FCC Emmisions Designator9M6G7D (4T); 13M4G7D (8T); 28M1G7D (16T)
Industry Canada ID1856A-U5358GX1
ReliabilityNEBS Level 3 ready
Digital Line Interfaces
DSX-1 (4, 8 or 16 each)
ConnectorRJ-48C modular jack
Line CodeAMI or B8ZS, selectable
Line Buildout0-655 ft. selectable
LoopbackLocal, Far End, Internal Signal
ComplianceANSI-1987-102-T1 3
Auxiliary Interfaces
Orderwire (DTMF)RJ-11, 100 addresses
VF8 pin modular jack, 4-wire

0dBm @ 600 ohm, balanced
Aux Data (serial)8 pin modular jack, EIA-561

≤19.2kbps, selectable, DCE
Fault Interfaces
Network ManagementSNMP v2c (MIB II, enterprise MIBs), embedded HTML server, Telnet, VT-100 terminal
Far End ManagementVia NMS (embedded router, gateway address, subnet mask), front panel display
Interfaces
NMS 110/100BaseT, RJ-45, auto-sense
NMS 210/100BaseT, RJ-45, auto-sense
External Alarm Interface
Connector9-pin Sub-D female
Outputs2 Form C Relays (Major, Minor)
Inputs2 TTL with internal pull-ups
Power Environment
Input Voltage Range-20 to -60 Vdc or
+20 to +60 Vdc
Power Consumption<70 Watts
Power Connector3-pin terminal block
Operating Temperature
IDU0°C to +50°C
RF Unit-30°C to +55°C
Humidity
IDU95%, non-condensing
RF Unit100%, condensing
Altitudeup to 15,000 ft/5000 m
Wind Loading (RF Unit)up to 110 mph/96 kts
MTBF>100,000 hours (each IDU and RF Unit)

Physical Dimensions

IDURF Unit
Size (in/cm)17.2 X 10.9 X 1.72 / 43.6 X 27.6 X 4.414.1 X 10.9 X 1.72 / 35.8 X 27.6 X 4.4
Weight (lbs/kg)6.5/2.912.0/5.4
Mechanical
RF UnitAntenna Port
(outdoor RF cable not provided)
Type-N female

IDU PortTNC female

Cable to IDULMR-240 or equiv. <100m
LMR-400 or equiv. <200m
LMR-600 or equiv. <300m
MountingIDUEIA rackmount, 19” or 23”, 1RU

RF UnitEIA rackmount, 19”or 23”, 1RU, or outdoor pole mount bracket (optional)
Selectable Frequency Channel Pairs
4xT1 5.8 GHzA1: 5731.5 MHz, A2: 5816.5 MHz, B1: 5745 MHz, B2: 5830 MHz, C1: 5758.5 MHz, C2: 5843.5 MHz
8xT1 5.8 GHzA1: 5734 MHz, A2: 5819 MHz, B1: 5756 MHz, B2: 5841 MHz
16xT1 5.8 GHzA1: 5745 MHz, A2: 5830 MHz
Ordering Information

Order NumberProduct Description
Lynx.GX 4T62291Low Band Terminal, 301-51850-10L0

62292High Band Terminal, 301-51850-10H0
Lynx.GX 8T62139Low Band Terminal, 301-51145-10L0

62142High Band Terminal, 301-51145-10H0
Lynx.GX 16T62284Low Band Terminal, 301-52290-10L0

62286High Band Terminal, 301-52290-10H0

ACC-GX-RF-2Optional RF Unit Outdoor Mounting Kit

201-31075-1Optional AC Adapter 110/220 VAC with cable and connector

Call for detailsServPak 24x7 Enhanced Service and Support contracts (1yr-3yr)
Shipping Configuration
Lynx.GX 4T, 8T, or 16T IDU (Indoor Unit)
Lynx.GX Low Band or High Band RF Unit
ACC-GX-IF-1 IDU Mounting Kit
ACC-GX-RF-1 RF Unit Indoor Mounting Kit
12” IDU to RF Unit cable
Quick Install Guide
User Documentation on CD-ROM

1 Output power is specified at zero attenuation
2 Does not include air latency of approximately 5.4 µsec/mile
3 ITU-T G.823, GR-499-CORE
4 RF Unit installed outdoors with 8ft. parabolic antenna, 99.999% one-way availability, average climate/terrain, no multipath reflection.