Tsunami 45 Mbps License-Free Wireless Ethernet Bridge (100BaseT)
The Tsunami wireless bridges provide full-duplex 100BaseT (Fast Ethernet) connectivity under license-free regulations (ISM). Under these regulations, these radio bridges require no frequency coordination or licensing, resulting in "instant" connectivity of 100BaseT access for line-of-sight distances beyond 15 miles.
Tsunami 100BaseT connections transport up to 45 Mbps full-duplex (90 Mbps total) for data communications. In addition a T1 connection is provided alongside the 100BaseT connection for direct PABX connectivity for combined voice and data WANs. Additional services such as voice orderwire and auxiliary data are also provided.
Tsunami wireless bridges provide high-speed connections that are more reliable than fiber or wire. These radios provide significant cost savings compared to leased-line connections and also allow fast and easy connections where wire or fiber access is impossible or too costly.
Rear View Applications
The Tsunami wireless bridges are ideal for backbone connections of ISPs and CLECs to establish new points of presence. They also may be used for spurs to connect direct enterprise customers to the PoP. Enterprises may connect WAN and PABX connections between campus locations using the Tsunami.
-No operating license required (in many countries)
-45 Mbps full-duplex throughput (90 Mbps total)
-Wayside T1
-Frequency Range:
Single Channel: 5725-5825 MHz
Dual Channel: 5250-5350 MHz & 5725-5825 MHz
- Compliant with:
FCC (United States) Part 15.401 (U-NII)
IC (Canada) RSS-210 (LE-LAN) rules
-Point-to-point communications from less than 1 mile to more than 15 miles
-Wide DC Power Input ± 20 to ± 63 V
-Wide operational temperature
-Built-in loopback, far-end monitoring and orderwire
-2-year warranty
Specifications and Ordering Information
System
Frequency Band (single Ch) 5725-5825 MHz
(dual Ch) 5250-5350 MHz & 5725-5825 MHz
Capacity 44.736 Mbps
Antenna Connector N-type female
Output Power (single Ch) >/= +17 dBm, +20 dBm typical
Output Power (dual Ch) >/= +10 dBm, +13 dBm typical
RF Attenuation Range 20 dBm, minimum
Receiver Threshold -79 dBm, BER=1x10 6
System Gain (single Ch) 97 Bm
(dual Ch) 90 dBm
Maximum Receive Level -5 dBm, error free
Regulatory Compliance FCC Part 15.401, Class B & IC RSS210
Data Interface
Fast Ethernet Interface 100BaseTX/FX
Connector RJ45/ST
Compliance IEEE 802.3
Auxiliary Connections
Orderwire Handset 2-wire, RJ-11
VF Orderwire Bridge 600 ohm balanced, 4 wire, 0 dBm, DB25 female
Diagnostics Port RS-232 (craft), DB9
NMS 10BaseT (HTTP, SNMP)
Aux Data Port RS-232/RS-422, (Clear Service Channel) Alarm Port 2 Form C, 6 TTL, DB25
Test Points output power, near & far-end RSL
Wayside T1 (DSX-1) or E1_ (CEPT-1)
Power/Environment
DC Power ±20 to ±63 Volts, <45 Watts
Optional AC Adapter 100-250 Volts, 50-60 Hz
Power Connector 6-pin barrier strip, plug-in
Operational Temperature -30 to +65°C
Humidity 0 to 95% non-condensing
Altitude 15,000 feet, maximum
Physical
Size (WxHxD)_ 17.2 x 3.5 x 14.5 inches (2RU) Weight 11 pounds
-Wayside E1 interface only available on model 27710-52
-19-inch EIA rack mount, 2-unit height (mounting brackets supplied)
Ordering Information
System
27710-51xxx 5.8 GHz Single Band w/ T1
27710-51xxx 5.8 GHz Single Band w/ E1
27700-51xxx 5.3/5.8 GHz Dual Band w/ T1
Channel Options
27710-51A1x (A1 channel Tx=5750 MHz, Rx=5800 MHz)
27710-51A2x (A2 channel Tx=5800 MHz, Rx=5750 MHz)
27700-51A1x (A1 channel Tx=5284 MHz, Rx=5759 MHz)
27700-51A2x (A2 channel Tx=5759 MHz, Rx=5284 MHz)
27700-51B1x (B1 channel Tx=5316 MHz, Rx=5791 MHz)
27700-51B2x (B2 channel Tx=5791 MHz, Rx=5316 MHz)
AC/DC Adapter
277x0-5xxx0 Without AC Adapter
277x0-5xxx1 With AC Adapter
*Specifications subject to change without notice.
