MIL Series Analog Video and Audio Transmitter

The MIL Series brings a new level of performance and reliability to video and audio transmission. Available in L, S, C and X – Bands, the MIL-100 provides a minimum of 2W of power into any load. A low power selection is available for applications were power consumption is critical or link margin is sufficient. Packaged in a rugged aluminum housing, the single-board electronics construction lends the MIL Series to applications where severe environmental conditions are the norm. Frequency selection is controlled by a sixteen-position selector switch or by an optional BCD code plug for remote control in 1 MHz steps. An optional cut-and-rotate scrambler is integral to the receiver. A comprehensive front panel 9-pin connector provides quick and easy integration into any system without expensive specialized connectors. Two balanced audio subcarriers may be factory selected to any frequency between 5.5 to 7.5 MHz and configured for either microphone or line level. Video and audio pre-emphasis may be set to either the NTSC or PAL standard. The MIL Series transmitter is well suited for applications in Homeland Security, surveillance, law enforcement, military UAV and RPV, remote broadcast, video production, and airborne data/telemetry.

Download the MIL Series Analog Transmitter data sheet - PDF Version

Electrical:

· Frequency Range

- MIL Analog 100L - 1.7 to 1.9 GHz
- MIL Analog 100S - 2.2 to 2.5 GHz
- MIL Analog 100C1 - 3.2 to 3.5 GHz
- MIL Analog 100C2 - 4.4 to 5.0 GHz
- MIL Analog 100C3 - 6.2 to 6.4 GHz
- MIL Analog 100X - 8.2 to 8.6 GHz

· Ferrite Isolator Output Protection
· VSWR - Infinite (open or short)
· Modulation - True FM
· Modulation Sense - Positive
· Frequency Stability - +0.002%
· Emphasis - NTSC or PAL
· Spurious/Harmonic Output - > -65 dBc

· Analog or Digital Input filtering options
· Video Input Impedance - 75 ohms unbalanced
· Video Input Response - 10 Hz to 4.5 MHz
· Video Input Sensitivity - 8 MHz/Volt
· Audio - any two between 5.5 to 7.5 MHz

- Phase Lock Loop
- 20 Hz to 20 kHz +1.5 dB

>> 600 ohms Balanced Input
>> Microphone or Line Level

· Power Output

- High Power - 3.0 W nominal
- Low Power - 0.3 W nominal

Environmental:

· Operating temperature: -10 to +65 °C

· Relative humidity: 0 to 95%, non-condensing

Mechanical:

· 9-pin full function I/O connector
· Dimensions - 1.5 H x 2.5 W x 3.5 L inches
· Video Input - BNC female

· Housing – milled aluminum
· Weight – 6.0 oz.
· RF Ouput – SMA female

Power:

· Operating voltage: +11 - +14 Vdc

· Current: 500 mA

Options:

VID-1
VID-2
FRQ-0
FRQ-X
FRQ-BCD
SUB-1
SUB-2
SCRAM
SCRAM

NTSC format
CCIR format
Fixed Frequency Single Channel
X number of channels (16 max.)
Frequency Selection via BCD
Any frequency between 5.5 to 7.5 MHz (mic or line level)
Any frequency between 5.5 to 7.5 MHz (mic or line level)
Fixed code cut-and-rotate video scrambler
Configurable code cut-and-rotate video scrambler

Accessories:

Antennas:

A complete line of antennas for a variety of applications is available.

MIL Series Analog Microwave Video and Audio Transmitter