PRODUCT SEARCH

PRODUCTS

NEWS

Sun, 22 Dec 24 06:01 pm EST    Languages: Español  Français  Português
Extranet Login | Site Map | Contact Us

Our Coordinates: Lat 42.75 N, Long 71.85 W  


8GHz System 

General Parameters
Operating Frequency Range8.275 to 8.5GHz
Modulation typeQPSK
Data capacity and channel spacing
     2 x 2.048 M b it/s(2E1) 3.5 MHz
     4 x 2.048 M b it/s(4E1) 7 MHz
     1 x 8.448 Mbit/s(1E2) 7 MHz
     8 x 2.048 M b it/s(8E1) 14 MHz
     16 x 2.048 Mbit/s(16E1) 28 MHz
     l x 34.368 Mbit/s(1E3) 28 MHz
Applicable StandardsITU-R 386(3)
CCIR Rec 1055-1
Tuning Range>60 MHz
Frequency sourceSynthesizer
Forward error Correction (FEC)Improves Rx performance by up to 4 dB at 10-6
System Configuration optionsNon-Protected (1+0)
Protected (1+1), hot standby
(Rx hit-less c/o) or twin path
(hit-less clo).
Channel Selection From IDU, via NMS or Management Terminal
Most operational selections can be done
via IDU front panel, Management Terminal or NMS
Digital Interfaces
TypeG.703 compliant E1, E2, E3 rates (2.048, 8.448, 34.368 Mbit/s)
FramingG.704 (E1), G.742 (4E1/E2), G.751 (4E2/16E1/E3)
Digital Line CodeHDB3
Digital 1/0 connectors optionsBNC 75 Ohm, unbalanced 12O Ohm, balanced 25 Pin D-type
Transmitter
Power Output+23dbm
Frequency Stabilityless than l0ppm (0.001%)
Attenuation Range15dB, Mute : s/ware control
Receiver
Receiver TypeDouble Conversion
Background BER< 10-11
Receiver Upper limit-2OdBm
Receiver Sensitivity (10-6 BER) and System GainSENSITIVITY (dBm)SYSTEM GAIN (dB)
2El-91.5114.5
4E1/1E2-88.5111.5
8E1-85.5108.5
16E1/1E3-85.5105.5
Management Capability
LoopbacksNear end Baseband, IDU IF,
ODU RF, Far end Baseband.
Signal StrengthAnalogue test points (ODU),
LCD (IDU) and Remote
DiagnosticsLocal and remote status using LCD, Craft Terminal, or NMS
Performance MonitoringG.826 at El and Radio Frame level
Alarm Inputs/outputs4 Isolated Inputs, 6 Relay Outputs
Network ManagementElement, Local (Domain) and Full Network management (opt) available.
Power Supply
Standard Input21 to 57 VDC, floating earth
Optional110 to 250V AC - external
ConnectorWieland 8213 Type
Consumption (per station)60W (1+0); 110W (1+1)
Environmental
Temperature Range
ODU-30oC to +55oC
IDU0oC to +50oC
Relative Humidity
ODUAll weather Operation
IDU< 90%, non-condensing
Altitude70 to 106 kPa
EMCEN 55022 (Class B)
Electrostatic DischargeEC 801-2 (Level 4)
Wind speed (ODU)Operating : 160 km/h
Survival : 200 km/h
Standard Service Channels
Number of service channels3
Voice Frequency channelsOne 4-wire plus E&M inter-station voice channel (Bridge), and/or unit to unit Order Wire (Handset) with call facility
ConnectorRJ12 (Bridge) RJ11 (Handset) 
Serial Data Channels2
Rate300-19200 Baud
ProtocolRS232 (TxD, RxD, CTS, RTS, DTR, DSR, Gnd)
Connector9 Pin D-type, DCE
Mngment Terminal Interface9 Pin D-Type, DTE
NMS Data ChannelCustom
NMS User Interface10 Base T, RJ45
Mechanical
Dimensions
IDU19" rack, 2U (482x88x380)
ODUApprox 4lOx350xl10mm
Weights
IDU9 kg (1+0), 10kg (1+1)
ODU9 kg (excl Antenna)
Easy clip-on procedure between ODU and Integral Antenna. Antenna alignment not disturbed by removing ODU.
Indoor to Outdoor Unit Interface
TypeSingle co-axial cable
Impedance50 Ohms
Connector TypeN
Recommended cable lengthUp to 350m
Antennas
Integral Mount Antennas
Size:0.6m1.2m 1.8m
Gain (dBi)30.837.140.3
Front/back ratio (dB)546264
3dB Aperture (deg)4.62.21.4
Mass (kg)3164173
Interface Flange (PBR)848484