PRODUCT SEARCH

PRODUCTS

	Unlicensed Radio
	FSO IR Laser
	Licensed Microwave Radio
	Wireless Local Loop (WLL)
	Backup Switches & NMS
	ATM Muxes & Channel Banks
	Voice & Video-over-IP
	xDSL Modems & Line Drivers
	VSAT Satellite
	Microwave Accessories
	Wireless Network & Installation Services

NEWS

Fri, 08 Nov 24 09:19 am EST

Languages:


Our Coordinates: Lat 42.75 N, Long 71.85 W

Technical Specifications (18,23,26 and 38 GHz)

Technical Specifications (18,23,26 and 38 GHz)

Pinnacle Digital Microwave Radios
Operating at 13, 15, 18, 23, 26 & 38 GHz with Capacities of 155 Mbit/s OC-3/STM1 and Ethernet 100BaseT

Pinnacle radios are specifically designed for high capacity synchronous and IP based applications including first and last mile network access, Sonet/SDH ring closure, and cellular base station backhaul. Pinnacle radios are meeting the growing demand for more bandwidth while maintaining high spectrum efficiency.

Pinnacle
Pinnacle’s versatile design allows low-cost transmission of high-capacity data through narrow or congested spectrum. This spectral efficiency is complimented by a physical architecture that promotes rapid and cost-effective installations. Using multiple plug-in modules, the indoor unit (IDU) provides various customer signal interface(s) as well as access to the SNMP and local management ports for on-site commissioning and maintenance. The outdoor unit (ODU) consists of an RF unit directly integrated with a low-profile antenna - all connected to the IDU through a single coaxial cable. For critical paths, Pinnacle can also be configured for redundant hardware protection (1+1) using either a single or dual antenna design.

Versatile

Plug-In data interface modules are field interchangeable and allow simple access to all standard interfaces
Transport for ATM and SONET/SDH based systems
100 BaseT Interface is ideal for LAN, WAN & ISP
Last-mile spur access
Cell based network back haul for GSM, PCS, Cellular, 3G

Easy To Install & Operate

Typical install time of less than 3 hours
Integrated ODU/Antenna assembly
Up to 1000 feet separation between ODU/IDU
Simple graphical interface for initial set-up and maintenance
Internal loopbacks, separate TX/RX switching, remote software downloads
SNMP management interface

Reliable

Highly integrated MMIC, DSP, and flash technologies
Extended MTBF
Increased availability using redundant configuration
Complete Digital Design
Designed and Manufactured using ISO 9001 Standards

Technical Advantages

128 QAM modulation allows narrow 28 MHz operation
Offers a high gain option for wideband channels
Advanced forward error correction (FEC)
Automatic Transmit Power Control (ATPC)
Dual FLASH memory for software backup
Common IDU reduces sparing and operating costs

Outdoor_Unit BackPanel

OUTDOOR UNIT 13, 15, 18, 23, 26 & 38 GHz

Integrated RF / Antenna assembly
Eliminates waveguide loss, allows polarization selection and simplifies RF replacement without affecting antenna alignment.

OUTDOOR UNIT (ODU) Features

RF Unit
Antenna
AGC Monitor Port.
RF Unit Latch
Antenna Alignment Adjustments (Vertical and Horizontal)

INDOOR UNIT 155 Mbit/s, STM-1/OC-3
Rack Mountable Either Direction

Indoor_Unit BackPanel

INDOOR UNIT Back Panel

INDOOR UNIT (IDU) Features
Alarm/Status LEDs
Plug-In Line Interface Module
Accessory Port (Async Service Channel & HSB interconnection)
Modem Port for Remote Dial-in Access
Alarm Relays
Network Management (10 Base-T SNMP)
+24 or -48 VDC
IDU to ODU Connection Single Coax Cable (RG-8 up to 300m)
Local Control Craft Terminal or PC Interface (RS 232)

Technical Specifications¹²

System Parameters

Frequency Bands: 13-38 GHz

Frequency Stability: ±2 ppm

Residual BER: <10 -13

Transmitter Type: Digital modulator, up-converter

Power Control (ATPC): 0 to 25 dB

Receiver Type: Down converter, coherent demodulation

Standards Compliance

System: FCC Part 101, ETSI EN 301 751

Antenna: FCC Part 101 Category A or ETSI high-performance, BABT 211 ZV Class 2

EMC: FCC Part 15 Class B, ETSI ETS 300 385, EN 301 489

Payload/Interface: SONET applicable standards, ITU-T G.703, G.707, G.783, G.823, G.826, G.957, G.958

Payload

Capacity: 155.52 Mbit/s

Type: Clear channel or SONET/SDH regenerator section

Electrical Interface: CMI, BNC connectors

Optical Interface: Single or multi-mode Intra-office, short or long haul
SC, ST or FC connectors

Service Channels: 19.2 Kbits asynchronous; RS-232
2 x 64 Kbits synchronous; G.703

Wayside Channel: T1 or E1; G.703

Ethernet User Interface: 100BaseT
100BaseT + 2T1/2E1100BaseT + 2T1/2E1 + DS3/E3

Frequency Dependent Parameters

General	13 GHz	15 GHz	18 GHz	23 GHz	26 GHz	38 GHz
Frequency Range	12.75- 13.25 GHz	14.4- 15.35 GHz	17.7-19.7 GHz	21.2-23.6 GHz	24.5-26.5 GHz	37.0-40.0 GHz
T/R Spacing	266 MHz	420, 490, 728 MHz	1010, 1560 MHz	1008,1200, 1232 MHz	1008 MHz	700, 1260 MHz
ETSI Specifications	EN 300 234 Class 5B	EN 300 234 Class 5B	EN 300 430 Class 5A	EN 300 198 Class 5A	EN 300 431 Class 5A	EN 300 197 Class 5A

Standard Bandwidth

Output Power	-	-	18.0 dBm	17.0 dBm	17.0 dBm	17.0 dBm
Channel Bandwidth	-	-	40 or 55 MHz	50 or 56 MHz	56 MHz	50 or 56 MHz
Modulation	-	-	32 or 16 QAM	16 QAM	16 QAM	16 QAM
Threshold @ 10 -6 BER	-	-	-71 or -73 dBm	-71 dBm	-71 dBm	-70 dBm
FCC Emission Designator	-	-	40M0F7W	50M0F7W	-	50M0F7W

Narrow Bandwidth

Output Power	18.0 dBm	19.0 dBm	15.5 dBm	14.5 dBm	14.5 dBm	14.5 dBm
Channel Bandwidth	28 MHz	28 MHz	27.5 MHz	28 MHz	28 MHz	28 MHz
Modulation	128 QAM	128 QAM	128 QAM	128 or 256 QAM	128 QAM	128 or 256 QAM
Threshold @ 10 -6 BER	-69 dBm	-69 dBm	-69 dBm	-68 dBm	-68 dBm	-67 dBm
FCC Emission Designator	-	-	-	25M0F7W	-	25M0F7W

General Parameters

Antenna

Type: Parabolic reflector; integrated or external

Diameter: 1' (30 cm), 1.5' (45 cm), 2' (60 cm), 3' (90 cm), 4' (120 cm), 6' (180 cm)

Wind Loading: Operational: 100 mph (160 km/h), Survival: 125 mph (220 km/h)

Polarization: Linear (vertical or horizontal)

Adjustment Angle: ±35° elevation, ±15° azimuth

Power

Standard Input: -36 VDC to -60 VDC

Optional Input²: 24 VDC ± 20%

Power Consumption: 115 watts (non-protected); 240 watts (protected)

Environmental

Temperature:

Operational Range: ODU: -50°C to +55°C

Full Performance: ODU: -33°C to +55°C / IDU: -5°C to +45°C

Relative Humidity: ODU: 100%, IDU: up to 95% non-condensing

Altitude: 15,000 feet (4,500 m)

Mechanical

IDU Dimensions: 1 RU (4 cm) x 19" (44.5 cm) x 12" (30.5 cm) (h x w x d)

IDU Weight: 4.7 lbs. (2.14 kg)

ODU Dimensions: 38 GHz: 13" x 13" x 12" (33 x 33 x 30.5 cm) (h x w x d)

13/15/18/23/26 GHz: 11.8" x 9" x 6.3" (30 x 23 x 16 cm) (h x w x d)

ODU Weight: 15.4 lbs. (7 kg) includes RF assembly only

IDU to ODU Connection: 1 coaxial cable up to 1000' (300 m), Belden 9913 (RG-8) or equivalent, 2 'N' type male connectors

Network Management

Type: Integral SNMP agent, Craft Terminal Interface (CTI), GUI interface

Physical Interface: PPP over RS-232 modem port (up to 56 Kbit/s), 10 BaseT Ethernet port, VT100 craft terminal port (9.6 Kbit/s)

User Interface: SNMP, CTI via Telnet, CTI via direct serial
interface, GUI interface

Security: 3-level password protection, Challenge Protocol (CHAP) security

Remote Software Updates: Flash download via TFTP over Ethernet or dial-up PPP

NMS Compatibility³: OpenViewä, NetViewä or any SNMP-based NMS

NM IP Rating: IP addresses for radios and third-party equipment accessible over multiple cascaded links

Protected Branching Loss

	Primary	Standby
Transmit	1.5 dB	6.5 dB
Receive	1.5 dB	6.5 dB

Footnotes
1) All specifications are subject to change without notice.
2) Non-protected specifications.
3) OpenView and NetView are registered trademarks of Hewlett Packard Corporation and IBM Corporation.