Antennas for Access and Extension Points & Serial and Ethernet Adapters
7012 - 5.15 dBi Gain Indoor/Outdoor Omnidirectional Antenna with pole mount
Antenna enclosed in long-life ultra-violet stabilized polycarbonate cylinder. May be
used indoors or out. Includes pole mounting for outdoor use. Radiation pattern tends to
fill available space. Not available in all countries.
|
|
Half-power Beam Width: |
+/-18 degrees vertical, 360 degrees horizontal |
Height: |
13.5" (34.3 cm) |
Diameter: : |
1.125" (2.9 cm) |
Mounting Mast Diameter: |
2" (5 cm) |
Cable Length: |
12" (30.5 cm) |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7013 - 5.15 dBi Gain Indoor/Outdoor Omnidirectional Antenna with ceiling
mount
Antenna is similar to the 7012 above, but includes suspension clamps for mounting on
ceilings in lieu of a pole mount. It is not suitable for outdoor use. Not available in
all countries.
|
|
Half-power Beam Width: |
+/-18 degrees vertical, 360 degrees horizontal |
Height: |
13.5" (34.3 cm) |
Diameter: : |
1.125" (2.9 cm) |
Mounts on dividers in suspended ceilings from 0.94" to
1.40" (2.4cm to 3.6cm) |
Mounting Mast Diameter: |
2" (5 cm) |
Cable Length: |
12" (30.5 cm) |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7014 - 9.0 dBi Gain Outdoor Omnidirectional Antenna
Use when longer-range omnidirectional coverage is needed. Not suitable when stations have
elevation differences relative to this antenna. Not available in all countries.
|
|
Half-power Beam Width: |
+/-18 degrees vertical, 360 degrees horizontal |
Height: |
13.5" (34.3 cm) |
Diameter: : |
1.125" (2.9 cm) |
Mounting Mast Diameter: |
2" (5 cm) |
Cable Length: |
12" (30.5 cm) |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7015 - 1.0 dBi Gain Indoor Omnidirectional Access and Extension Point
Antenna
This antenna is included with all Proxim Access Points.
|
|
Half-power Beam Width: |
+/-8.5 degrees vertical, 360 degrees horizonta |
Height: |
5.48" (13.9 cm) |
Diameter: : |
0.22" at tip; 0.57" at base
(0.56cm tip; 1.4cm base) |
Cable Length: |
N/A |
Connector Options: |
(-05): Reverse TNC-female |
|
7016 - 1.0 dBi Gain Indoor Omnidirectional Serial Adapter and Ethernet
Adapter Antenna
This antenna is included with the 7910/11 Serial Adapter and the 7920/21 Ethernet Adapter
and can only be used with these products.
|
|
Half-power Beam Width: |
+/-8.5 degrees vertical, 360 degrees horizontal |
Height: |
3.31" (8.4 cm) |
Base height: |
1.08" (2.7 cm) |
Connector Options: |
(-05): Reverse TNC-female |
|
7022 - 12 dBi Gain Outdoor Directional Antenna
Use for most general-purpose outdoor directional applications. This patch antenna has a
fat, oval shaped pattern with little to no coverage behind the unit. Not available in
all countries.
|
|
Half-power Beam Width: |
+/-22 degrees vertical, +/-18 degrees horizontal |
Dimensions: |
7.12" H x 7.12" W x 0.75" D
(18.1 cm x 18.1 cm x 1.9 cm) |
Mounting Mast Diameter: |
2" (5 cm) |
Cable Length: |
12" (30.5 cm) |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7023 - 9 dBi Indoor Directional Antenna
Use for most general-purpose indoor directional applications. This patch antenna has a
fat, oval shaped pattern with little to no coverage behind the unit. Not available in
all countries.
|
|
Half-power Beam Width: |
+/-55 degrees vertical, +/-60 degrees horizontal |
Dimensions: |
4.88" H x 4.88" H x 0.68" D |
Mounting Mast Diameter: |
2" (5 cm) |
Cable Length: |
12" (30.5 cm) |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7024 - 8.5dBi Indoor/Outdoor Directional Antenna.
Use for most general-purpose indoor or outdoor directional applications. This patch
antenna has a fat, oval shaped pattern with little to no coverage behind the unit. Not
available in all countries.
|
|
Half-power Beam Width: |
+/-25 degrees vertical, +/-36 degrees horizontal |
Dimensions: |
4" H x 3.75" W x 1.26" D
(10.2cm x 9.5cm x 3.2cm) |
Cable Length: |
12" (30.5 cm) |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7025 - Transmit 1 dBi/Receive 21dBi Outdoor Directional Dual Gain Antenna
Parabolic directional outdoor antenna with split amplification gain for transmit and
receive. Specifically designed for use in ETSI-regulated countries where maximum radiated
power is limited to 100mW. It maintains maximum output power allowed while amplifying
receive path to 21 dB, thereby increasing range for point-to-point applications.
|
|
Half-power Beam Width: |
+/-6 degrees vertical, +/-6 degrees horizontal |
Dimensions: |
20" H x 24" W x 6" D
(50.8cm x 70cm x 15.2cm) |
Mounting: |
from ¾" to 2" diameter
(1.9cm to 5.1cm) |
Cable Length: |
24" (61 cm) |
Control Box: |
NEMA 4-Rated |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7026 - Transmit 1 dBi/Receive 9dBi Outdoor Omnidirectional Dual Gain Antenna
Omnidirectional outdoor antenna with split amplification gain for transmit and receive.
Specifically designed for use in ETSI regulated countries where maximum radiated power is
limited to 100mW. It maintains maximum output power allowed while amplifying receive path
to 9 dB, thereby increasing range for point to multi-point applications.
|
|
Half-power Beam Width: |
+/-19 degrees vertical, 360 degrees horizontal |
Height: |
17" (43.2 cm) |
Diameter: |
1.32" (3.4cm) |
Mounting mast diameter: |
2" (5 cm) |
Cable Length: |
24" (60.5 cm) |
Control Box: |
NEMA 4-Rated |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
7031 - 15 dBi Outdoor Directional Antenna
Use for highly directional applications. This antenna has a narrow, oval shaped pattern
with little to no coverage behind the unit. Not available in all countries.
|
|
Half-power Beam Width: |
+/-15 degrees vertical, +/-15 degrees horizontal |
Height: |
18" (45.7 cm) |
Diameter: |
3" (7.62 cm) |
Mounting Mast Plate: |
5" x 3.125"
(12.7 cm x 7.9 cm) |
Cable Length: |
33" (83.8 cm) |
Connector Options: |
(-02): N-female
(-05): Reverse TNC-female |
|
|